Lattice Semiconductor MachX05-NX страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 63

background image

MachXO5-NX Development Board
Evaluation Board User Guide

© 2022 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at

www.latticesemi.com/legal

All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.

2

FPGA-EB-02052-1.0

Disclaimers

Lattice makes no warranty, representation, or guarantee regarding the accuracy of information contained in this document or the suitability of its
products for any particular purpose. All information herein is provided AS IS, with all faults and associated risk the responsibility entirely of the Buyer.
Buyer shall not rely on any data and performance specifications or parameters provided herein. Products sold by Lattice have been subject to limited
testing and it is the Buyer's responsibility to independently determine the suitability of any products and to test and verify the same. No Lattice
products should be used in conjunction with mission- or safety-critical or any other application in which the failure of Lattice’s product could create a
situation where personal injury, death, severe property or environmental damage may occur. The information provided in this document is
proprietary to Lattice Semiconductor, and Lattice reserves the right to make any changes to the information in this document or to any products at
any time without notice.

«
1
2
3
4
...
»

Содержание MachX05-NX
































































Отзывы:

Нет отзывов

Похожие инструкции для MachX05-NX

Бренд: ECS Страницы: 52

Бренд: Meccanica Fadini Страницы: 4

Бренд: C&T Solution Страницы: 65

PCM-8152 3rd Generation

Бренд: Aaeon Страницы: 6

conga-HPC/EVAL-Server

Бренд: Congatec Страницы: 54

Бренд: ECS Страницы: 52

Бренд: QDI Страницы: 20

Fatal1ty Z87 Killer Series

Бренд: ASROCK Страницы: 102

Бренд: Xilinx Страницы: 31

Бренд: Biostar Страницы: 65

Бренд: Parker Страницы: 56

Бренд: Infineon Страницы: 11

Бренд: Advantech Страницы: 5

nForce 680i LT SLI

Бренд: XFX Страницы: 137

Бренд: Supermicro Страницы: 121

Бренд: MSI Страницы: 98

Бренд: ASROCK Страницы: 125

NOVA-PV-D5251-G4-R11

Бренд: IEI Technology Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды