Lattice Semiconductor HW-USBN-2B, Руководство пользователя

Страница: 10 / 21

Programming Cables
User Guide
© 2009-2019 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal .
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
10 FPGA-UG-02042-26.2
Table 6.1. Pin and Cable Reference (Continued)
HW-USBN-2B
Flywire color
TDI/SI TDO/SO TMS TCK/SCLK ISPEN/PROG DONE TRST(OUTPUT) VCC GND I2C: SCL I2C: SDA 5 V Out
Orange Brown Purple White Yellow Blue Green Red Black Yellow/White Green/White Red/White
HW-USBN-2A
Flywire color
TDI TDO TMS TCK ispEN/PROG INIT TRST(OUTPUT)/DONE(INPUT) VCC GND
na
Orange Brown Purple White Yellow Blue Green Red Black
HW-DLN-3C
Flywire color
TDI TDO TMS TCK ispEN/PROG
na
TRST(OUTPUT) VCC GND
na
Orange Brown Purple White Yellow Green Red Black
Programming cable pin type
Target Board Recommendation
Output Input Output Output Output Input Input/Output Input Input Output Output Output
— —
4.7 kΩ
Pull-Up
4.7 kΩ
Pull-Down
(Note 1)
— —
(Note 2)
—
(Note 3) (Note 3)
—
Connect the programming cable wires (above) to the corresponding device or header pins (below).
Slave SPI Port Devices
ECP5 MOSI MISO — CCLK SN
Optional connections to device
PROGRAMN, INITN and/or DONE signals
Required Required
— — —
LatticeECP3 MOSI MISO — CCLK SN Required Required — — —
MachXO2/MachXO3/MachXO3D
SI SO — CCLK SN Required Required
— — —
CrossLink™ LIF-MD6000 MOSI MISO — SPI_SCK SPI_SS
Opt.
CDONE
CRESET_B Required Required — — —
iCE40™/iCE40LM/iCE40 Ultra™/
iCE40 UltraLite™
SPI_SI SPI_SO — SPI_SCK SPI_SS_B
Opt.
CDONE
CRESET_B
Required Required
— — —
I
2
C Port Devices
MachXO2/MachXO3/MachXO3D — — — —
Optional connections to device PROGRAMN, INITN
and/or DONE signals
Required Required SCL SDA —
Platform Manager II — — — —
Required Required SCL_M + SCL_S SDA_M + SDA_S —
L-ASC10 — — — — — — — Required Required SCL SDA —
CrossLink LIF-MD6000 — — — —
—
Opt.
CDONE
CRESET_B Required Required SCL SDA —
Headers
1 x 10 conn (various cables) 3 2 6 8 4 9 or 10 5 or 9 1 7 — — —
1 x 8 conn (see Figure 3.4 ) 3 2 6 8 4 — 5 1 7 —
— —
2 x 5 conn (see Figure 3.5 ) 5 7 3 1 10 — 9 6 2, 4,or 8 —
— —
Programmers
Model 300 5 7 3 1 10 — 9 6 2, 4,or 8 —
— —
iCEprog™ iCEprogM1050 8 5 — 7 9 3 1 6 10 — — 4 (Note 5)