![background image](http://html.mh-extra.com/html/handson-technology/pl2303hx/pl2303hx_user-manual_590179001.webp)
1
www.handsontec.com
Handson Technology
User Guide
PL2303HX USB-UART Converter Cable
This PL2303HX cables are a family of USB to TTL serial UART converter cables incorporating Prolific's
PL2303HX USB to Serial UART interface IC device which handles all the USB signaling and protocols.
Inside the big USB plug is a USB-Serial conversion chip and at the end of the 36" cable are four wire - red
power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides
the 5V@500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most
common 3.3V logic level chipsets.
Thanks to its separated pins, this cable is a perfect candidate for
powering, connecting, and accessing the login and debug console on the Raspberry Pi, ESP8266 WiFi
module or other development board with serial Tx and Rx data I/O.
SKU:
ASS-1015
Brief Data:
Standard USB type A male and TTL 4 pin connector.
Fully Compliant with USB Specification v2.0 (Full-Speed)
Prolific based USB to TTL Serial Cable are designed using the standard PL2303HX chipset.
The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB.
Cable Length: 1-meter.
Works with Win7, Win8&10 ( need manual driver installation)
TTL levels is 3.3V.
Note: Please be aware that while the I/O pins in this cable operate at 3.3V, the VCC pin is 5V. The VCC
pin is NOT 3.3V like the I/O pins.