![background image](http://html.mh-extra.com/html/neutrik/opticalcon-no2-4fdw-a/opticalcon-no2-4fdw-a_handling-instruction_1676545001.webp)
optical
CON
|
NO2-4FDW-A Soldering Instruction
R
Page 1
HANDLING INSTRUCTION
Strip all 4 copper cords at a length of
3 mm, while using the baring tool.
Slide the prepared shrink tube with a length
of 10 mm over copper cord (pin 1 and 4).
Pre-solder tip of the copper cords for
enhanced heat transfer.
ATTENTION! Don’t use too much solder.
3
A
B
Cable Preparation
C
A.
HANDLING INSTRUCTION