USB 3.0 Spectra
™
3001-15
1-port USB 3.0 15m Active Copper Extension Cable
Quick Start
Guide
For additional details on configuration and operation of your USB 3.0 Spectra 3001-15,
please refer to the user manual available online at:
For technical support with this cable, contact:
This product works with AIA
USB3 Vision
™
compliant devices.
Before you get started, install any software required to operate your USB 3.0 device(s).
1
1
Computer
USB 3.0 Device
(e.g. Camera)
Attach your USB 3.0 device into the Spectra 3001-15’s USB 3.0 receptacle. AIA USB3 Vision
™
locking USB connectors
are supported if needed.
3
2
Plug the Spectra 3001-15’s USB 3.0 host connector into a USB 3.0 port on your computer.
USB 3.0 Host
Connector
mounting slots for cable tie
USB Power
Connector
22
1
1
USB 3.0 Locking
Receptacle
USB 3.0 Spectra™ 3001-15
Active Cable
It is recommended to plug the Spectra 3001-15’s USB power connector into any USB port on your computer.
This step is essential if your USB 3.0 device is not self-powered or draws more than 2.5W of power.
3
The Spectra 3001-15 cable is not backward compatible with USB 2.0/1.1 devices. Per USB-IF specification, USB 3.0 devices must attempt enumeration
on USB 3.0 first. If your USB 3.0 device enumerates on USB 2.0 first, then your device is out of spec and will not operate with this cable.
Conveniently secure your configuration by wrapping the included cable tie around the USB 3.0 receptacle’s two mounting slots.
