S1 Dream Espresso Machine – GUI Addendum
Dream GUI Addendum
Page 6
The “E” in the upper left corner stands for Economy mode; i.e. 15A mode. If
you have the Dream plugged into a 15A outlet this needs to be showing.
The Menu to set this is covered later and is referred to as Full Power - ON
(20A) or OFF (15A).
S1Cafe is the name of one of the four User Selectable profiles that will be
covered later. The Temperature under the User Profile Name is the current
group boiler temperature.
The machine can be set to use and display Celsius rather than Fahrenheit if
British English rather than American English is selected as the Language.
The tea cup looking icon near the lower right indicates that the steam/hot
water boiler is ON. When this icon is showing the area below the icon scrolls
back and forth between “TBOILER” and the steam boiler temperature. This
is programmable so that you can achieve your desired steam pressure
shown on the pressure gauge on the front panel. The original S1 modes had
this preset to 1.2-1.3 bars. However, you can easily pick a temp that makes
the pressure lower or higher than this to control the quality and quantity of
your steam
3.1 bar is the group pressure which equals the incoming street pressure
when the pump is not running during an espresso shot.
Tank models do
not support this feature. Their espresso shot pressure shows on the
mechanical pressure meter.
This display shows what the screen looks like during a shot. The two cup
icon on the left indicates that the 2 cup button was pushed. Alternately, the
one cup icon would display. The bar shows the shot time relative to the total
programmed shot time and the “6s” indicates that we are 6 seconds into the
shot. The final time value at the end of the shot remains for 10 seconds or
until the next shot is started, whichever comes first.
Note that the normal water drop icon between the time and the group
pressure changes from the water pressure OK to the pump on icon during a
shot.
In this screenshot, note that the machine has now been set to Full Power
ON (20A mode) and the “E” icon is no longer displayed in the upper left
corner.
Also, the squiggle line under the group temperature indicates that the group
boiler is on. When the steam boiler is on, its blue indicator lamp to the left of
the Home screen panel blinks; i.e. there is no indication on this screen.
In the lower left corner ,the display alternates between the current time and
the next programmed Off time if this feature has been enabled. When the
machine is Off, the next programmed ON time alternates with the clock.
