S1 Dream Espresso Machine – GUI Addendum
Dream GUI Addendum
Page 20
7.9.6
Set MAT (
M
ilk
A
djustable
T
emperature)
This future feature is for a replacement steam arm that has a temperature sensor in the tip. When the
programmed milk temperature is reached, the steam automatically shuts off.
The firmware apparently has the support for this feature, but the replacement arm with this support
is not yet available nor is any timetable for its availability known. The menus described below will let
you enable the feature and set a temperature. However, if you do enable it, since there is no sensor
installed, the control board sees an erroneous value and throws an alarm. Bottom line, set MAT to
OFF and leave it there unless you get one of these steam arms installed sometime in the future.
Depending on where you are in the profile menus, press
the Up or Down arrow to highlight the MAT icon and
display that text on the top of the screen. Then press
the Menu button to enter the MAT programming screen.
Use the up or down arrows to highlight whether you want the
MAT feature ON or OFF. (For now be sure to pick OFF), then
press the Menu key to exit back to the main Profile menu.
Since MAT is not yet available, if you set MAT to ON the
Dream will warn you with a single long Beep. When you
return to the Home Screen you will see an active Alarm.
If you just couldn’t help yourself on the previous screen and
selected ON before pressing the Menu key, you will see this
screen. You can use the up or down arrows to select a desired milk
temperature, then press Menu to lock it in and exit to the main
Profile menu. At the moment the only impact of this setting is to
cause an alarm
Range of Values:
45-85C
113-185F
If B.English or Italian are selected as the language this value is show in
Celsius.
