Laski VD 500, Руководство по эксплуатации

Страница: 29 / 39

29
1. After first 500 km:
- all bolted joints and retighten if necessary
2. Every 5 000 km or every 12 months:
- all bolted joints and retighten if necessary
- axle, springs, parts for excessive wear or contingent damages and
replace them if necessary
- wheel bearings are maintenance-free (with permanent grease packing)
- exchange them only in case of contingent damage
- ball coupler and towing bracket or towing eye and hitch: apply
corresponding grease film on their surface (e.g. as per DIN 51825 KTA
3K4)
- coupling parts for excessive wear or contingent damages and replace
them if necessary
- tires and wheel rims for wear or contingent damage
- jockey wheel and its mechanism
- lights and reflector glasses
- plug and cables of electric installation - exchange them only in case of
contingent damage
- Pay special attention to routine maintenance of the battery. It requires special
tools, measuring appliances and skilled attendants. If necessary, ask for help
by an authorised service in order to inspect or to recharge the battery,
particularly after a longer operational break exceeding 50 days. A longer
storage time might also cause a drop of battery potential needed for the next
start before new season.
Recharge the battery to full capacity also before longer break or storage,
particularly in winter.
Service life of the battery installed in the machine is rather limited. It is usually 3-4
years and after this period the battery should be replaced by a new one.
Hot-dip galvanized parts:
So-called white corrosion may occur on their surface – however, it is only an
optical problem.
To eliminate this problem, take the following measures: when putting the trailer
aside (or for storage), keep it in sufficiently ventilated space. After work in winter,
rinse the hot-dip galvanized parts with clean warm water or by a steam jet.