Laski ATR 90, Руководство по эксплуатации, Страница: 19 / 29

TRENCHER
ATR 90
19
- Block the jib against unwilling sinking.
- Loosen the fixing bolts on the slider and set the required depth in its
longitudinal grooves. Afterwards, tighten the bolts properly (see fig.).
- In the required depth the slider should follow the terrain contour and be in
touch with the ground over its total length (see fig.).
Slider fixation and adjustment Slider parallelism
Putting into Operation
- Do not use the machine under conditions of low visibility, especially at foggy
weather, when you may overlook persons coming. Operate it only at daylight
or with sufficient lighting.
- Every operator of this machine is fully responsible for any injury or damage
caused to the third persons, animals and property within the operating reach of
the machine.
- Before work first observe the working area. To ensure maximum life of the
trencher and to keep the chain tips sharp, any contacts with stones, flint brick
and other hard materials around the base of the trencher should be kept to an
absolute minimum.