Manual: CS-8000RGB FX MK2 | CS-12.000RGB FX MK2
Manual: CS-8000RGB FX MK2 | CS-12.000RGB FX MK2
page 10 / 37
page 11 / 37
English
English
Use the „Up“ / „Down“ buttons to navigate to „uASt“
Press „Enter“, use the „Up“ / „Down“ buttons to switch the option to „on“ and confirm with
„Enter“
C: Deactivate Master setting on Slave lasers
As soon as the Master option is set to „on“, the laser sends out the control signal for the Slave
units. Make sure that all Slave units have the Master setting set to „oFF“:
D: Set Sound-to-Light or Auto mode on Master laser
To use the Master-Slave operation: set the Master to either Sound-to-Light mode (4.1) or
Auto mode (4.2.).
E: Establish link to Slave lasers
The Slave units must be set to DMX („d512“) mode and must be assigned address 001 (see
4.4. DMX 512)
4.4. DMX 512
The DMX mode requires a DMX controller or a Master laser (see 4.3. Master-Slave operation)
to be connected to the laser.
To switch to DMX mode, select „d512“ by navigating with the „Up“ / „Down“ buttons and
confirm with „Enter“:
The submenu for setting the DMX address loads:
Press „Enter“ and the „Up“ / „Down“ buttons to set the desired DMX address.
Confirm with „Enter“ and press „Exit“ to return to the main menu.
DMX Chart
The laser uses 18 DMX channels, so make sure that the next device uses an address that doesn’t
overlap with this range.
Channel
Value
Function
1
Intensity
0
Laser off, CH 2 - 18 not available
1 - 255
RGB intensity 0~100% (also affects sound and auto mode)
2
Pattern select
0 - 255
Pattern selection
3
Rotation (Z-axis)
0 - 127
Rotation angle selection
128 - 191
Rotation counter-clockwise speed
192 - 255
Rotation clockwise speed
4
X-axis Rotation
0 - 127
Rotation X position steps
128 - 255
Rotation X speed
5
Y-axis Rotation
0 - 127
Rotation Y position steps
128 - 255
Rotation Y speed
6
X-axis Movement
0 - 127
X-axis movement position
128 - 255
X-axis movement speed
7
Y-axis Movement
0 - 127
Y-axis movement position
128 - 255
Y-axis movement speed
8
Size X
0 - 255
Size X from big to small
9
Size Y
0 - 255
Size Y from big to small
10
Pattern gradient
0 - 255
Gradient speed
11
Scan speed / Points
0 - 127
Scan speed
128 - 255
Point speed
12
Color change
0 - 24
Original color
25 - 199
Color selection
200 - 224
Automatic color change effect
225 - 255
Rainbow color change effect
13
Color speed
0 - 255
Speed adjustment for automatic color change effect and multi
color step through
14
Grating effect
0 - 255
cycle through grating effects per 50 value
15
Operation mode
0 - 199
DMX mode, CH 1 - 18 available
200 - 224
Sound mode, CH 1 & CH 16 - 18 available
225 - 255
Auto mode, CH 1 & CH 16 - 18 available
16
Red adjust
0 - 255
Red brightness adjust 100~0% (also affects sound and auto
mode)
17
Green adjust
0 - 255
Green brightness adjust 100~0% (also affects sound and auto
mode)
18
Blue adjust
0 - 255
Blue brightness adjust 100~0% (also affects sound and auto
mode)
4.5. SETTINGS
To access the settings, select „SEt“ by navigating with the „Up“ / „Down“ buttons and confirm
with „Enter“:
The settings menu holds several configuration options for the laser system.