43
three screws on the pen carriage as shown below and locate the focusing lens in the pen
carriage.
Apply a drop or two of the cleaning solution on a cotton bud and lightly clean the focusing lens.
Use a second cotton bud to dry or air dry the lens.
Make sure the lens is clean and dried before putting it back in the pen carriage unit.
2. Cleaning and protecting the X, Y rails:
In order to prevent the X and Y rails from chemical by-products produced when laser
passes through acrylic sheets, applying NSK, PS2 grease can prevent the rails from being
Distributed & Supported by: Jorlink USA, Inc. | Tel: (336) 288-1613 | [email protected] | www.JORLINK.com
44/60
