I
BASIC CONNECTIONS
Connect the supplied video cord.
Ifthe TV has an S-VIDEO input jack, connect a the supplied S-VIDEO cable.
This unit features
3-D
YIC
separation
circuitry
so it is recommended
you
connect an S-VIDEO cable to obtain superior
picture quality.
Stereo amplifier
rOOO
OJ
<::>
m
~RINPUT~
CD
I
R
,.
I
I
,
I
~~)
Connectto the stereo amp's CD, LD, VDP, or other input
jack with the supplied audio cord. (Do not connect to
the PHONO jack.)
You can connect to the TV's audio input jack, but it is
recommended
you connect to the stereo amplifier
to
obtain superior
audio playback quality.
I
These connections
are also possible
elf you have a stereo amplifier
with optical or coaxial inputs,
refer to page 10. Connection
to this unit's
digital
output
(optical or coaxial) is possible.
.If you have a Pioneer projection monitor, refer to page 11. You
can connect
to this
unit's
control
jack for system
remote
control.
.If you have an AV amplifier
bearing the Pioneer ~
mark, refer
to page 11.
You can connect to this unit's control jack for system remote
control.
Align
the
plug
correctly
and push
into the S-VIDEOjack.
~
O~A
Splug
R~
If you use an S-VIDEO cable, refer to your TV's operation
manual.
Finally,
connect
the power
cord to the wa II socket.
Once the power
cord is connected,
even if you
switch
power OFF, power is still supplied
to the
player's
built-in
memory
(Resume play function
etc.). Forthis reason, make sure the unit is connected
to the wall socket. If you connect to the amplifier's
standby power SWITCHED OUTLET socket or other
socket, functions
such as Resume
play will
not
operate.
AC-3 RF OUT terminal:
This terminal is intended for use with Dolby AC-3* components
(*1) planned for future release. With this terminal,
you will be
able to connect an AC-3 RF input of amplifiers
and surround
processors, and playback LDs formatted
with Dolby AC-3 (*2).
(*1) Indicated with gmD~':'~~':::~Dcl(For hardware)
(*2) Indicated with gmD~~.~NDLI
(For software)
III
You cannot playback currently
available
LDs, LD players, AV
amplifiers,
etc., with this terminal.
• Do not connect this terminals to the audio input terminal
of a
normal stereo or AV amplifiers.
*
"Dolby",
"AC-3"and
the double-D symbol are trademarks
of
Dolby Laboratories
Licensing Corporation.
9
<VRB1139
>
En
