Using the Shuttle Ring and Jog Dial changes playback speed and
direction.
This function
is useful to search for a desired passage.
SCAN
PLAY
SCAN
II
-
II
II
II
II
-
II
8G
cs
0]00
JOG MODE button/Jog
indicator
Jog dial (LD/video
part of CDV)
Playback
is advanced
according
to the speed and direction
of
rotation
of the JOG dial. Both forward
and reverse
playback
is
possible,
and frames
can be advanced
at speeds
of 1/2 speed,
normal speed, and double speed. Rotating the jog dial clockwise
forwards
playback.
Conversely,
rotating
it counterclockwise
left
reverses
playback.
To use the JOG dial on the remote
control
unit, first press JOG MODE so that Jog indicator
lights.
During
playback
of an LD or CDV video
part, when the JOG dial stops
rotating,
the frame is displayed.
Shuttle
ring
While rotating the SHUTTLE ring, playback advances or reverses
at high speed. There are four scan modes which can be selected
with rotational
angles of the SHUTTLE ring.
x2 speed: Slightly
rotate the SHUTTLE ring. Scan speed becomes
about x2 the normal
playback
speed.
x5 speed: Further rotate the SHUTTLE ring. Scan speed becomes
about x5 the normal
playback
speed.
Low Scan mode:
Further
rotate the SHUTTLE ring. Scan speed
becomes
about x10 the normal
playback
speed.
High Scan mode:
Further
rotate the SHUTTLE ring. Scan speed
becomes
about x20 the normal
playback
speed.
To resume
normal
playback
after using the JOG dial:
Press PLAY~.
When not using the JOG dial on the remote
control
unit, set JOG
MODE to OFF.
Although
JOG MODE will
automatically
switch
OFF (The Jog
indicator goes out) approximately
5 minutes after you stop operating
the JOG dial, it is recommended
that you set JOG MODE to OFF as
soon as you finish using the JOG dial in orderto
prevent unnecessary
battery consumption.
g
II -
When
the button
is pressed,
scan speed
is x10 the normal
playback
speed for about two seconds
and then becomes
x20
the normal
playback
speed.
To switch the screen display,
press the DISPLAY button.
e With video part of CDV, High Scan mode cannot be carried out.
e CDs or audio part of CDVs : Sound is heard at low volume
level
while
scanning.
Others: Sound is muted.
Notes on CAV:
While
scanning,
noise
may occur
on the screen.
This is not a
malfunction.
Notes on CLV:
• While scanning, the color of the image may fade out or the image
sometimes
fluctuates.
lit
The scan speed is different
between inner tracks and outer tracks.
17
<VRB1139
>
En
