To specify side A or B for play:
Side A refers to the upper side of a disc loaded in the table, and
B side refers to the reverse side. This is different
from the actual
A and B sides ofthe
disc.
To play side A only,
press the DISC SIDE A without
pressing
~/II.
After side A has finished,
the player stops. To play side B
only, press the DISC SIDE B without
pressing
-'/11.
After side B
has finished,
the player stops.
Indications when disc sides change
eWhen
changing
from side A to side B
Side A
- - - - - - - - - ,
I
Side B
- - - - - - - - -
j...,J
eWhen
changing
from side B to side A
SideA
---------~
I
Side B
- - - - - - - - - ~
Since the picture
circuit
is deactivated
and the interference
between
signals is eliminated
with the Direct CD function,
more
pure sound can be reproduced.
e When the Direct CD function
is activated,
the player does not
display
information
on the monitor
screen.
eln
Direct
CD mode,
time
for starting
play
becomes
short
compared
with that of normal
play operation.
Afi:er performing
step 1 on the previous
page, press the DIRECT
CD.
Each time AUDIO D/A is pressed during
playback,
audio output
is switched.
For example:
eto hear only the analog audio of a disc with digital
audio
eto hear only one channel
of stereo disc
eto select audio of the multiplex
disc
LD
LD with digital audio
Audio
source
can be switched
between
digital
audio,
analog
audio, L channel
and R channel
of stereo audio.
c:
digital audio _
analog audio _
L channel of
(stereo)
(stereo)
analog audio
l
Rchannel?f
_
L.channel?f
_
R channel of
-J
digital audio
digital audio
analog audio
e With a disc encoded
with CX auto-switching
signals
C
ex
off (stereo)_
ex
on (stereo) -
ex
on (L channel)
J
ex
off (R channel) -
ex
off (L channel) --
ex
on (R channel)
e With a disc encoded
with CX auto-switching
signals
r
stereo audio -
L channel --
R channel
::=J
To exit Direct CD mode:
Press DIRECT CD again.
To play an LD:
Cancel the Direct CD mode. Otherwise,
the
LD
cannot
be set on
the disc table.
NOTE:
During LD play, the player does not enter Direct CD mode even if
DIRECT CD ispr~ssed.
During CDV play, the player automatically
turns on and off the picture
circuit according
to
the video part or audio part in the Direct CD mode.
On screen display:
The information
is displayed
on the screen by pressing
DISPLAY
on the remote control
unit. Also, when programming
or editing,
the information
is displayed.
By turning
off the screen display or canceling the input mode, the
player automatically
turns off the picture circuit,
and the screen
turns to black.
LD with analog audio
CDorCDV
r
stereo audio -..
L channel --
R channel
::=J
With a Multi Audio
disc (an
LD
bearing
the
!l.i!i~p~
mark and the
MULTI AUDIO mark or the
t.J~~MUlTIAUDIO
mark), you can listen to
the various
audio tracks recorded
on the disc by using AUDIO to
select
between
the analog
and digital
tracks,
and to select
between
the left (1/L) and right (2/R) channels.
NOTE:
With AC-3 discs, sound is not heard when the analog R channel is
selected.
Discs marked with the
D~
mark
Discs marked
D~ are recorded
with
the CX noise
reduction
system for powerful
audio reproduction
with little noise. (Analog
audio only) However,
some discs marked
D~ are not encoded
with
the signals
necessary
to instruct
the unit automatically
switch
on the CX system.
If sound is noisy or undulates
when a
disc with a D~ mark is played,
press AUDIO D/A on the remote
control
unit.
eD~
is a trademark
of CBS Inc. This
player
meets
the
CX
EXPANDING
SPECIFICATION.
Searching for the
beginning
of the
chapter (track)
currently
playing.
Searches fot the
SKIP
beginning
of the next
II
1+1I
I I ~
II -
chapter (track).
Press a button
repeatedly
or hold it depressed
(only with
the
remote
control
unit);
the
chapters
(tracks)
will
be skipped
successively.
15
<VRB1139
>
En
