manualshive.com logo in svg

Laser Technology UltraLyte LR B, Руководство пользователя

Поделиться
Скачать
Laser Technology UltraLyte LR B Скачать руководство пользователя страница 24

Section #1 – Getting Started

                                                                  22 

Electronic Copy of LTI's UltraLyte LR B User's Manual - 2

nd

 Edition © 2002 

Error Codes 

Table 5 lists and explains each of the possible error codes. 

Table 5. Error Codes and What They Mean 

Code Explanation 

doF 

Display overflow. The measurement exceeds the display 
capacity. It is possible to receive a doF message in the 
scope and still have a valid measurement display on the 
screen. 

E01 

Measurement error - target never acquired. The target 
was out of range or was too close.  

E02 

Measurement error - insufficient data. The instrument’s 
view was obstructed or the target moved out of range. 
Measurement error - unstable targeting. Caused by poor 
aiming or by panning off the target. 

E03 

Measurement error - low level of interference from a light 
source such as a headlight or a laser jamming device. 

E07 

Jam detect - high level of interference from a light source 
such as a headlight or laser jamming device.  

E52 

Temperature too cold. Stop operation. 

E53 

Temperature too hot. Stop operation. 

E54 
E55 
E56 
E60 
E61 
E62 
E63 

Calibration or memory checksum failure.  
If the error persists, contact Laser Technology, Inc.  
See the inside front cover for LTI contact information. 
 

RFI Considerations 

The UltraLyte LR B does not display a specific error message indicating 
the presence of radio frequency interference (RFI). The instrument's 
electronics have been designed for optimum RFI immunity. 

 

If RFI is present, the instrument displays an error code. The 
exact code depends on the level and nature of the RFI. 

 
 
 

Содержание UltraLyte LR B





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды