Laser Technology UltraLyte LR B, Руководство пользователя

Страница: 15 / 60

Section #1 – Getting Started
13
Electronic Copy of LTI's UltraLyte LR B User's Manual - 2
nd
Edition © 2002
Figure 8. Inserting the Batteries
Battery Compartment
(Handle)
Cap
Inserting the Batteries
Two C batteries are required to power the UltraLyte LR B. Refer to the
instructions and Figure 8 below when inserting the batteries.
1.
Remove the battery compartment cap by twisting counter-
clockwise.
2.
Insert the two batteries, positive end first, into the battery
compartment in the instrument handle.
3.
Replace the cap.
4.
Twist the cap clockwise until it stops and is secure.
Be careful to not over-tighten the cap.
Battery Voltage Level
The UltraLyte LR B continuously monitors its power source. LTI has
defined an acceptable battery voltage range to ensure that the
instrument has sufficient battery voltage to guarantee correct operation.
•
The “BATT” display feature flashes on the screen
if the battery
voltage drops to the upper end of the acceptable battery
voltage range. It continues to flash as long as battery voltage
is within the acceptable range. You should replace the
batteries as soon as possible. The display backlight is not
accessible during low battery situations.
• The “BATT” indicator stops flashing, and stays displayed on the
screen
if the battery voltage level drops below the acceptable
battery voltage range. If you fail to replace the batteries, the
button panels will lock out.