LTI TruPoint 200h User’s Manual • Section 5 - Function Menu
Page 48
Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.
HUD Routine
1.
Select your target and look through the eyepiece, using the crosshair to aim to your target.
The Area icon
,SD icon
Shot 1 will appear in the display. The SD icon is
flashing which is prompting you to measure the Slope Distance to the “face” of the target.
2.
Press-and-hold the
button. The laser indicator
is displayed while the laser is active.
The laser will remain active for a maximum of 10 seconds while acquiring data about the target.
The measured slope distance appears briefly (2 seconds) in the main display
3.
Select your second target and look through the eyepiece, using the crosshair to aim to your
target. The Area icon
, SD icon
, and Shot 2 will appear in the display.
The SD icon is flashing which is prompting you to measure the Slope Distance to
the “face” of the target.
4.
Press-and-hold the
button. The laser indicator
is displayed while the laser is active.
The laser will remain active for a maximum of 10 seconds while acquiring data about the target.
The measured Slope distance appears briefly (2 seconds) in the main display
5.
The Area
icon and the calculated Area result is displayed.
Button sequence during the Area routine:
•
Pressing the back key
clears the last measurement
and allows you to reshoot that measurement.
•
Pressing the
button soft key, it will exit the Area Function
and goes to main measurement screen.
•
Press the
button to clear last measurement and to
re-shoot the previous point.
•
When the Area result is displayed, just press the
button to
start the routine and repeat the steps.
**Draft B**
