LTI TruPoint 200h User’s Manual • Section 3 - Basic Operations
Page 24
Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.
Measurement Point of Reference
The measurement point of reference of the TruPoint 200h can be changed by short pressing
the
button.
The TruPoint 200h has a back Endpiece (Figure 17) for taking measurements from corners
or edges. It is best to have the measurement reference point selected for the back of the
instrument when taking measurements with the Endpiece.
Main
Display
HUD
Description
Measurement Reference is from the front of the unit.
Measurement reference is located at the center point
of the unit, the ¼-20 thread.
Measurement reference point is from the back
of the unit.
Figure 17
Endpiece
Extended
**Draft B**
