manualshive.com logo in svg

Laser Technology TruPoint 200h, Руководство пользователя

Поделиться
Скачать
Laser Technology TruPoint 200h Скачать руководство пользователя страница 35

LTI TruPoint 200h User’s Manual • Section 4 - Settings Menu

 Page 33

Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.

HUD Aiming 

The HUD Aiming reticle is viewed in the heads-up display. 

1.

Long press the Settings 

 button and use the 

 and 

 buttons to highlight 

the System icon 

 SYSTEM will be displayed in the lower message area. 

1.

Press the 

 button to enter the System menu. 

2.

Navigate to the HUD Aiming icon 

. HUD AIMING will be displayed in the 

lower message area. 

3.

Press the 

 button to select the HUD Aiming reticle options. 

4.

Use the 

 and 

 buttons to scroll through the options. Press the 

 button to select the 

desired option.

•

•

•

5.

Press the Left Soft Key 

 to return to the System Menu screen. 

6.

Press the Right Soft Key 

 or to return to the main measurement screen. 

**Draft B**

Содержание TruPoint 200h





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды