Laser Key Products 3D Pro Xtreme, Руководство пользователя

Страница: 41 / 55

Page
40
of
55
To measure the
spacing on a
shoulder stop key
like the Schlage
key, set a caliper to
the space that you
want to measure
using the space info
on the edit page
and the measure
from the shoulder
toward the tip. For
a tip stop key,
measure from tip
to bow.
To measure a
depth on a
Schlage key,
find the space
for the depth
you want to
measure and
measure from
the edge of the
key to the
edge of the
cut. Compare
the reading
against the Cut
Depth info on
the edit page.
Cut a Schlage key to all ones and measure the depth with calipers. According the edit page for
the Schlage key, one depths should measure to 320 thousandths of an inch. If your key
measures too shallow, say 325 then make a negative adjustment to the cutter depth offset. If
your key measures too deep, say 315 then make a plus adjustment to the cutter depth offset.
Negative adjustments are made by putting a minus sign in front of the number used in the
adjustment box.