Laser Key Products 3D Pro Xtreme, Руководство пользователя

Страница: 26 / 55

Page
25
of
55
The Tubular tracer can be used to trace all keys, it is not necessary change out the tracer when
changing jaws. If you alternate between tracers you will have to calibrate each time
You will have to calibrate the new tracer for Jaw 3 also unless you plan to alternate between
tracer types then you only have to calibrate for Jaw 1
Using the Tubular Jaw
Loosen the red t-knob behind the main jaw assembly, slide off the main jaw assembly, and
slide on the Tubular Jaw. There is a spacer on the left side of the Tubular Jaw that stops on the
silver screw. Tighten the red t-knob to lock the Tubular Jaw into place.
Supported
Blanks:
ILCO 1137B
LSDA 1137B
JMA CHI -1T
Clamp keys in the jaw with the notch of
the key placed into the cut out at the
back of the jaw. Tighten the red knob
on the front until the screw is firmly
holding the key in place.
Selecting Tubular Keys in the Software
To select A Tubular key click the
‘Type/Manufacturer’ tab under ‘Step 1: Select
Correct Key Type’ and choose the type of
Tubular to use.