www.lascarelectronics.com
Issue 1 10/2019 Page 2 of 6
EL-SIE-2+
High Accuracy Temperature and Humidity
USB Data Logger, EasyLog Cloud Compatible
NO SOFTWARE TO INSTALL
All the software needed to configure your EL-SIE-2+, and view and analyse the data it logs, is contained within the product itself. Just
connect the logger to your PC or Mac with a USB cable, open any web browser and in the address bar type “http://EasyLog.local”. No
internet connection is needed, and you can save this address in your bookmarks or favourites as normal.
The interface is easy to use and allows the following parameters to be configured:
• Logger and channel names
• Measurement units
• Logging rate and start mode
• Up to 16 separate alarms (high/low/pre-alarm/cumulative)
with thresholds, delay and hold
• Display and LED indicator modes
Once the logger is running, you can plug it back
into your computer and see the latest data, device
status and the event log. You can also chose to
stop the logger and change the configuration, or
just let it continue logging.
EASYLOG CLOUD DATA STORAGE
Store your data securely, and make it available from
any internet-connected PC or mobile device, with
EasyLog Cloud. The EL-SIE-2+ can upload logged data
to the Cloud from your PC or Mac, making sharing
and analysis easier than ever. For more information
and to set up an account on EasyLog Cloud, visit
www.easylogcloud.com.
Display
Logger Status
Explanation
USB Connected
The logger is connected via the USB cable
Push to Start
The logger is set up for Push to Start logging, a long
press of either button will start logging
Delayed Start
The logger is set up for Delayed Start logging and will
automatically start logging at the specified time
Triggered Start
The logger is set up for Triggered Start logging and
will start logging as soon as the specified limit (either
temperature, humidity or pressure) is reached
Low Battery
The batteries are low and should be changed when
possible
Memory Full
The memory is full and logging has stopped
Memory 90%
The memory is 90% full, and data should be down
-
loaded when possible
Calibration Pend
-
ing
The calibration will expire in < 30 days
Calibration
Expired
The calibration has expired
Logger Running
The logger is still logging but can be stopped by a long
press of the bottom button
Alarm Triggered
An alarm is currently active on the logger
Cumulative Alarm A cumulative alarm is active on the channel currently
being displayed
High Alarm
A high alarm is active on the channel currently being
displayed
Low Alarm
A low alarm is active on the channel currently being
displayed
Held High Alarm
A high alarm is being held on the channel currently
being displayed
Held Low Alarm
A low alarm is being held on the channel currently be-
ing displayed
High Pre-alarm
A high pre-alarm is active on the channel currently
being displayed
Low Pre-alarm
A low pre-alarm is active on the channel currently be
-
ing displayed
