Larson Electronics SPLT IVT-12VDC-1000VA-120VAC Series Скачать руководство пользователя страница 11

SPLT-xx-IVT-12VDC-1000VA-120VAC

Larson Electronics, LLC

 

 Phone: (800) 369-6671 

Fax: (903) 498-3364 

www.larsonelectronics.com 

11

 of 

11

MAINTENANCE 

There are no serviceable parts inside the fixture. However, it is good practice to routinely clean and check the 

fixture for proper function. 

USE AND CARE

Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment. 

Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of 

children when not in use. Inspect for good working condition prior to storage and before re-use.

 

 

REPLACEMENT PARTS

The 

SPLT-xx-IVT-12VDC-1000VA-120VAC

 is designed to provide years of reliable performance. Should the need for 

replacement parts arise, please contact Larson Electronics. 

THESE  INSTRUCTIONS  MAY  NOT  COVER  ALL  DETAILS  OR  VARIATIONS  OF  THIS  PRODUCT  FOR  YOUR  EQUIPMENT  OR  INSTALLATION 

REQUIREMENTS.  SHOULD  FURTHER  INFORMATION  NOT  COVERED  BY  THESE  INSTRUCTIONS  BE  REQUIRED,  PLEASE  CONTACT  LARSON 

ELECTRONICS BY EMAIL AT 

[email protected]

 OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE. 

PLEASE VISIT LARSONELECTRONICS.COM FOR 

WARRANTY

 AND 

RETURN

 INFORMATION.

Содержание SPLT IVT-12VDC-1000VA-120VAC Series












Отзывы: