Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
5
of
1
3
IND-MD-TF-MGF-HH-R1
3.
Start
3-1, Open gear 1 and 2. (Note: when spraying mist, both gear 1 and
2 shall open)
3-2, When the machine is used for the first time, each of the oil
bubbles need to be pressed 7-8 times until the oil bubble is filled with
2/3 of the gasoline (Note: when the machine is used again and there is
oil in the oil bubble and pipeline, skip this step directly to the next step).
3-3, Gently press oil bubble of f# carburetor, and long press the start button (
Note: the start button needs to be
long pressed, not intermittently) until the machine is started. Note: After spraying is completed, to restart the
machine, just press one oil bubble, and then press the start button gently to start. Don't press two oil bubbles nor
press one oil bubble many times when there is oil in two bubbles, otherwise the mach
i
ne won't be started due to too
much oil.