Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
11
of
13
IND-MD-TF-MGF-HH-R1
(b) Long term storage
Empty the .fuel tank.
1 .clean the gas intake diaphragm, and reassemble them.
2. clean the pesticide solution tank and pipe with boiling water.
3. clean the carbon deposition on all various parts, and recharge the battery.
(recharge once every 4 months for a long time no use).
4. clean every parts.
5 .check each part, replace the damaged parts timely.
6. store the machine in a ventilated and dry warehouse.
Application range and pesticide dosage ( only for reference)
A, Application on forestry and fruit trees
�
spraying mist):
1, Spraying time: before sunrise and after sunset with no wind or with breeze. 2, Weather: air humidity between
30-80%, temperature below 35 C (
the lower the temperature, the higher the humidity, the better the effect of
spraying
).
3, For crops lower than 5 meters, the pesticide can be blended with water for spraying mist. Generally with
pesticide/water ratio of 1 :5 to 1:10, the solution with amount equals to 150kg of water to be filled to the solution tank of
15-30kg, can complete the spraying work of one acre of land, whose spraying and diffusing length can reach more
than 10 meters. (in case of more pests in the land, more solutions shall be used and longer distance and more areas
will be covered.}.
B, (Diesel smoke spraying) formulating
method on non-edible crops
(the following method is only for r
�
ference, as the case might be) The spraying and diffusing length can reach 50
meters, with no wind or with breeze.
Blending order:
1.First mix the diesel diffusion agent with diesel and stir to uniform mixture, then add water and pesticide. The
mixture shall be fully dissolved before use. In mist spraying, open the water valve to position of 1 /3-2/3, switch
gear 1 and 2 uniformly to small opening, until the spraying is even and no flameout happens. Proportioning method:
1, Blend (diesel emulsifier or agricultural organosilicon) and diesel according to the ratio of 1: 15 (the total amount
of diesel covers 10% - 20% of the oil tank capacity). The mist concentration shall be regulated according to the
water/diesel ratio. The pesticide with amount of 10% oil tank capacity shall mix with water of 70% - 80% tank capcity,
stirred to uniform mixture and ready for use.
2, With diesel of 12-15 kg, pesticide of 5-6 kg, organosilicone of 200-300ml added to the tank, the rest will be filled
with water. The amount of organosilicon to be added depends when the diesel, pesticide and water mix together
