7
Copyright LapSafe® Self-Service Solutions
The ClassBuddy™ Trolley Range - User Manual
5. Charge only - set up
If you purchased a trolley that uses USB for charging and syncing then this section
is not relevant to you, procceed to
Section 6
Please ensure the cabinet is unplugged when you are loading AC adaptors in the
ClassBuddy™
1. Remove the rear door as described in
(Section 4).
2. You will find power strips for your AC adaptors in the back; plug your AC
adaptor into a plug socket and load the AC adaptor block onto the relevant
shelf.
3. Pass the device connector through the shelf and use the cable management
clips to hold the cable in place.
Repeat these steps until your trolley is fully loaded with devices.