background image

14

The ClassBuddy™ Trolley Range - User Manual

Copyright LapSafe® Self-Service Solutions

Recent guidance from the Health and Safety Executive regarding “Laptop computer charging trolleys safety 

alert” requires interpretation from each manufacturer as regards to their product compliance. The HSE  

statement can be found at: 

www.hse.gov.uk/services/education/safety121009.htm

 

CE Testing, Conformity and Declaration of LapSafe® 

  

At LapSafe® we are proud to confirm that ALL of our electrical products, going back over ten years, have been thoroughly tested and 

certified (by an authorised and INDEPENDENT testing house) and accordingly have been clearly CE marked.

Full CE compliance, which includes the requirements of LVD and EMC directives, is a STANDARD FEATURE of LapSafe®, as are many 

more “built in” safety features. CE Marking can be found on the product serial number plate, usually at the lower rear of the cabinet. 

CE Declaration of Conformity Certificate is issued with each product in the User Guide Pack. 

You may obtain further copies of the certificate specific to your product and serial number, or any further information and advice, 

upon request to our Customer support– 

call direct 01787 226147 or FREEPHONE the switchboard on 0800 130 

3456 or email [email protected].

Rest assured that your LapSafe® Product has been designed and built with Safety as the highest priority since we first introduced 

the concept of the “mobile laptop trolley” into the UK market in the last century. This is, indeed, why we are called “Lap SAFE”.

Residual Voltage 

 

The HSE has raised a concern (having identified at least one particular manufacturer’s trolleys with this “characteristic”) that many 

manufacturers’ trolleys (if indeed not the vast majority), may have a momentary residual voltage on the pins of the mains plug and 

that this could, if you touched the pins within a second or two of unplugging, result in an electric shock.

LapSafe® have been designed from the outset with safety internal circuitry as standard so as NOT to retain or present any significant 

residual voltage in this way. In fact, it is virtually impossible to get any such significant electric shock from our cabinets in normal 

use.

However, regardless of how safe any particular trolley may be, we endorse the recommendations for employing common sense 

practise as a generic rule for any mobile electrical appliance, such as switching off the mains socket before unplugging the power 

leads and NOT moving the trolleys without disconnecting and unplugging the power leads at both ends. Two of the wheels are 

fitted with locks as standard and should be kept locked as a reminder when power is connected and as a general safety rule as per 

the user instructions supplied with each cabinet.

For further information call LapSafe® on 
0800 130 3456 or visit our website at lapsafe.

*Mentor

 range from January 2010 

LAPSF076_23052011V2

*

Safety Declaration

Содержание ClassBuddy

















Отзывы: