background image

10

The ClassBuddy™ Trolley Range - User Manual

Copyright LapSafe® Self-Service Solutions

‘All Sync’ mode

Pressing three times after power-up will also select ‘All Sync’ mode.

BLUE

 and 

AMBER

 lights off, 

GREEN

 light flashing slowly = sync 

on standby waiting for devices and a host PC or laptop to be 
connected

BLUE

 and

 AMBER

 lights off, 

GREEN

 light solid = syncing one or

more devices

BLUE

 and 

AMBER

 lights off, 

GREEN

 light blinking briefly = All 

connected devices have synchronised for the preset period. 
(Default is set to one hour, after which the ClassBuddy™ will 
return each device to charge status to maintain optimum 
readiness.

From the ‘All Sync’ mode, pressing the black button again, returns the module to 
the default ‘Sync then Charge’ mode.

7. ClassBuddy™ options

Network connectivity

If your trolley features network connectivity, you can plug the trolley into your 
network by connecting a standard network cable into the auxiliary point on the 
back of the trolley.

Data transfer (DTM)

If your purchase includes DTM your trolley will be network ready (these are the 
red network cables within your charging bays), you can update all of your laptops 
simultaneously inside the trolley using Wake ON LAN software.

• 

Make sure that the trolley is connected to the network and switched on 

• 

Plug each individual red DTM cable inside the trolley into the network ports 
of each laptop and ensure that the trolley is switched on.

Содержание ClassBuddy

















Отзывы: