18
Lapierre Equipment |
SYRUP PRESS
| USER MANUAL | Version 01 - December 2021
SECTION 4
Start-up and operation procedures (continued)
4.8 SYRUP LEAKAGE
If syrup leaks between the hollow frames and plates during filtration, first turn off the pump. Then apply additional,
but not excessive, pressure to the press components using the pressure adjustment handles on the 7 in. or 10 in.
presses (Illustration 1 No. 8) located at the end of the press, or the jack (Illustration 2 No. 18) on the 15 in. presses,
also located at the end of the press. Restart the filter operation and repeat the sequence as necessary until the
flow has stopped.
4.9 RECOVERY DRAIN
This drain is used to collect residual syrup in the syrup press after the workday (see Illustration 2-C).
