5
Lapierre Equipment |
SYRUP PRESS
| USER MANUAL | Version 01 - December 2021
SECTION 2
SAFETY INSTRUCTIONS
2.1 INSTRUCTIONS
• It is important to read, understand and follow the instructions and warnings contained in this user manual.
• This manual must be stored in a known place and accessible at all times by staff.
• All product operators must be familiar with the contents of this manual.
• Certain instructions may not apply to your equipment, depending on your model.
2.2 WARNING
Electricity
• Before switching on the pump, check the power supply specifications. You will find them on the data sheet
attached to the motor. Also check the specifications of the electrical circuit you intend to use. Then make sure
that the two components are compatible.
• Never connect the electrical cords to overloaded electrical circuits.
• Never use extension cords that are longer than necessary or of a smaller gauge.
• Make sure that the electrical cords are in good working order, that they are not pinched or stripped, and that
they are not altered in any way that could affect their safe use.
• Never touch a stripped wire or a wire that has been pulled out of its electrical outlet when it is live. The pump
should then be switched off and repaired before it is switched on again and used.
• The user must check the grounding circuit. Some equipment must be used or connected to other equipment
that is also equipped with a grounding circuit. Disabling or a malfunctioning of this circuit may cause equipment
operating conditions that are hazardous to its users.
• Always switch off the power supply to the pump when it is not used for a long period of time.
Liquids
• Never expose the equipment to rain or excessive condensation.
• Never bring liquids into contact with the electronic components.
• Unless otherwise specified, never submerge the electrical components of this equipment.
Other
• Always keep hair, hands and jewellery out of reach of equipment components that are or could unexpectedly
turn on.
• Never place heavy objects on your equipment, as their weight could damage certain parts of your syrup press.
