LAPETEK LUNA-X: Asennus- ja huolto-ohje / Installation and care manual/ Monterings och bruksanvisning
OY LAPETEK AB
• www.lapetek.fi • [email protected]
10
INSTALLER SIGNED PRODUCT TEST DOCUMENT
Installer’s signature
Clarification of the installer’s name
Company name
Date and place
During installation, the installer must check the checklist below. Please note that the first checkpoints take place before the
actual installation. By signing the document, the installer ensures the installation has been carried out in accordance with the
installation instructions and that the sink is functioning properly and is flawless.
Before installation:
1.
When removing the sink from the packing check that all parts are included. Check also that
the sink has no visible surface defects / flaws / color defects / dents / scratches etc.
2.
The hole has been made in the worktop for the sink according to the dimensional drawing from the
installation manual. The sink has been fitted to it before installation.
3.
The straightness of the worktop on all sides of the sink has been checked,
4.
The sink and the hole for the sink have been treated with silicone (not adhesive) as instructed.
5.
The wall/floor drain is installed in relation to the sink in such a way that the water trap can be installed in such
a way that it doesn’t interfere with the installation of the waste mechanism and the sink or other functions.
After installation:
6.
All of the piping connections have been tightened and checked.
7.
The sink is filled with water up to the overflow and the water plug is opened, to ensure good water
flow and tightness of the piping.
8.
The piping of the sink is installed in such a way that it doesn’t disturb the functioning of the waste mechanism.
■
In case any of the checkpoints 1) to 8) above are not in order, the installer must immediately contact the seller/customer as well as
Lapetek service at +358 9 2511 030 for further information.
■
The warranty granted by Lapetek is conditional on the completion of this document and the certification of the condition of the checkpoints.
A copy of the test document must be submitted with a product reclamation.
