13: Advanced Settings
XPort Pro User Guide
126
Figure 13-5 CLI Configuration
2. Enter or modify the following settings:
Table 13-6
CLI Configuration
3. Click
Submit
.
Command Line Interface
Configuration Settings
Description
Login Password
Enter the password for Telnet access.
Enable Level Password
Enter the password for access to the Command Mode Enable level.
There is no password by default.
Quit Connect Line
Enter a string to terminate a connect line session and resume the
CLI. Type
<control>
before any key the user must press when
holding down the
Ctrl
key. An example of such a string is
<control>L.
Inactivity Timeout
Set an Inactivity Timeout value so the CLI session will disconnect if
no data is received after the designated time period. Default is 15
minutes. Enter a value of 0 to disable.
Telnet State
Select
Disabled
to disable Telnet access. Telnet is enabled by
default.
Telnet Port
Enter the Telnet port to use for Telnet access. The default is
23
.
Telnet Max Sessions
Maximum number of simultaneous Telnet sessions.
SSH State
Select
Disabled
to disable SSH access. SSH is enabled by default.
SSH Port
Enter the SSH port to use for SSH access. The default is
22
.
SSH Max Sessions
Maximum number of simultaneous SSH sessions.
