5: Network Settings
XPort Pro User Guide
29
Network 1 (eth0) Interface Configuration
This page shows the configuration settings for the Ethernet connection and lets you change these
settings.
To view and configure network interface settings:
1. Click
Network 1 >
Interface > Configuration
at the top of the page. The Network 1 (eth0)
Interface Configuration page appears.
Figure 5-2 Network 1 (eth0) Interface Configuration
2. Enter or modify the following settings:
Table 5-3
Network 1 (eth0) Interface Configuration
Network 1 Interface
Configuration
Settings
Description
BOOTP Client
Select
On
or
Off
. At boot up, the device will attempt to obtain an IP address from a
BOOTP server.
Notes:
Overrides the configured IP address, network mask, gateway, hostname, and
domain.
When DHCP is On, the system automatically uses DHCP, regardless of whether
BOOTP Client is On.
