3: Summary of CLI Commands
XPort Pro™ Command Reference
25
cpm level commands
Description
exit
Exits to the enable level.
get <group>
Displays the value of the specified group.
<group> = the name of the group.
set <cp> as input
Configures a CP as an asserted high input.
<cp> = configurable pin.
set <cp> as input assert
low
Configures a CP as an asserted low input.
<cp> = configurable pin.
set <cp> as output
Configures a CP as an asserted high output.
<cp> = configurable pin.
set <cp> as output
assert low
Configures a CP as an asserted low output.
<cp> = configurable pin.
set <group> <value>
Assigns a value to the specified group.
<group> = the name of the group.
<value> = numeric value to assign to the CP group. Can be
specified as hex
if prepended with “0x”.
show <group>
Displays group information for specified group.
<group> = the name of the group.
show cp
Displays configuration and group information for all CPs.
show groups
Displays all groups defined and their state.
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
device Level Commands
Command Path: enable>device
Level Prompt: device
The following commands are available in the device level.
device level commands
Description
auto show tlog
Continuously displays the internal trouble log.
auto show upload
Continuously displays the status of firmware upload.
clrscrn
Clears the screen.
default long name
Restores the default product long name.
default short name
Restores the default product short name.
dhrystone
Runs the Dhrystone benchmark program.
