2: Configuration Using Telnet or a Serial Port
XPort Pro™ Command Reference
10
To move to a different level:
Enter the name of that level from within its parent level.
For example:
>enable
(enable)#tunnel 2
Note:
Some levels require a number to indicate one of several level instances. In
the example, the number 2 indicates configuring the settings for tunneling on
serial port 2.
To exit and return to one level higher:
Type exit and press the Enter key.
Note:
Typing exit at the login level or the enable level will close the CLI session.
If Command Mode is configured for always-on operation, a new session will
immediately be restarted.
To view the current configuration at any level:
Type show
To view the list of commands available at the current level:
At the command prompt, type the question mark “?”. The list of current
commands appears. (There is no need to press Enter.)
Note:
Items within < > (e.g. <string>) are required parameters.
To view the available commands and their explanations:
At the command prompt, type “
*
“ and press Enter.
To view the list of commands available for a partial command:
At the command prompt, type the partial command followed by the question mark
“?”. (There is no need to press Enter.)
For example:
<tunnel-1>#echo?
displays a list of all echo commands at the
tunnel level.
