4: Web Manager Configuration
WiBox® 2100E Device Server User Guide
35
At Time of Disconnect
Select
Yes
to clear the input buffer when the network connection to or
from the device is disconnected. The default setting is
No
.
Flush Output Buffer (Network to Serial)
With Active Connect
Select
Yes
to clear the output buffer with a connection that is initiated
from the device to the network. The default setting is
No
.
With Passive Connect
Select
Yes
to clear the output buffer with a connection initiated from the
network to the device. The default setting is
No
.
At Time of Disconnect
Select
Yes
to clear the output buffer when the network connection to or
from the device is disconnected. The default setting is
No
.
3. When you are finished, click the
OK
button.
4. On the main menu, click
Apply Settings
.
Connection Settings - TCP
To configure a channel’s TCP settings
:
1. From the main menu, click
Connection
for either Channel 1 or Channel 2 to display the
Connection Settings page for the selected channel.
2. In the available fields, enter the following information:
Note:
See Connection Settings - UDP
for UDP connections.
Connect Protocol
Protocol
Select
TCP
from the pull-down menu.
