4: Web Manager Configuration
WiBox® 2100E Device Server User Guide
42
WEP Options
Authentication
Select an authentication scheme (
Open/None
or
Shared
) from the
drop-down list.
Encryption
Select the encryption type (
64
bits
or
128
bits
for WEP) from the drop-
down list.
64
bits
is the default encryption for WEP.
Key Type
Select the key type (
Hex
or
Passphrase
).
Key and Retype Key
Enter the
Encryption Key
in hexadecimal value if
Hex
is selected as
the key type. Enter key as a string if
Passphrase
is selected as the key
type. Passphrase input is not the same as ASCII input. A passphrase of
more than 20 characters is recommended for adequate security. Spaces
and punctuation are permitted.
TX Key
Select the key to use for transmission.
WPA Options
Authentication
Select
Pre-Shared Keys
from the drop-down list.
Encryption
Select the encryption type from the drop-down list.
TKIP
is the default
encryption for WPA.
Key Type
Select the key type (
Hex
or
Passphrase
).
Key and Retype Key
Enter the
Encryption Key
in hexadecimal value if the key type is
Hex
.
Enter key as a string if the key type is
Passphrase
. Passphrase input is
not the same as ASCII input. A passphrase of more than 20 characters
is recommended. Spaces and punctuation characters are permitted.
802.11i/WPA2-Personal Options
Authentication
Select
Pre-Shared Keys
from the drop-down list.
Encryption
Select the encryption type from the drop-down list.
CCMP
is the default
encryption for WPA2.
Key Type
Select the key type (
Hex
or
Passphrase
).
Key and Retype Key
Enter the
Encryption Key
in hexadecimal value if the key type is
Hex
.
Enter the key as a string if the key type is
Passphrase
. Passphrase
input is not the same as ASCII input. A passphrase of more than 20
characters is recommended. Spaces and punctuation characters are
permitted.
Advanced Settings
TX Data Rate
WiBox 2100E permits the control of the transmission data rate. Click the
Auto fallback
check box to allow the WiBox 2100E to set the data rate
automatically (or leave unchecked to set the transmission rate
manually). The default rate is
54 Mbps
.
If the
Auto fallback
check box is selected, choose the maximum
data rate from the drop-down list.
If the
Auto fallback
check box was not selected, select the fixed
data rate (in Mbps) from the drop-down list.
Min TX Data Rate
Selects the minimum data rate the device will use when auto-fallback is
enabled. The default is
1 Mbps
.
