9: Configurable Pin Manager
PremierWave® EN Embedded System on Module User Guide
88
To Configure CPM Settings
Using Web Manager
To configure a configurable pin, click
CPM
in the menu, select
CPs
and then the
desired CP
to configure.
To configure a CPM Group, click
CPM
in the menu, select
Groups
and then the
desired
Group Name
to configure.
Using the CLI
To enter the CPM command level:
enable -> cpm
Using XML
Include in your file:
<configgroup name=”cp group” instance=”
group name
”>
Include in your file:
<configitem name=”cp” instance=”
cp number
”>
State
Current enable state of the CP group is displayed. Click
Enable
or
Disable
to change the state.
Value
Displays the CP group’s current value or shows “Disabled” if the group is
disabled.
Bit
Visual display of the bit placeholders for a CP.
Level
A “+” symbol indicates the CP’s bit position is asserted (the voltage is high).
A “-“ indicates the CP voltage is low.
I/O
Indicates the current status of the pin:
I = input
O = output
<blank> = unassigned
Logic
An “I” indicates the CP output is inverted.
Binary
Shows the assertion value of the corresponding bit.
X = group is disabled or bit is unassigned in group
CP#
Shows the configurable pin number and its bit position in the CP group.
Add (button)
Select to add a specific configurable pin (
CP)
at a particular
bit
size, assign
the CP as
Input
or
Output
, click
Assert Low
(if desired), then click the
Add
button to add the particular configurable pin information for the current group
displayed in the table. Once added, the information for the configurable pin
will display for this group name.
Remove (button)
Select to delete a specific configurable pin (
CP)
and click
Remove
to
remove this pin configuration for the group name displayed in the table.
CPM – Groups Group
Status (continued)
Description
