5: Network Settings
PremierWave® EN Embedded System on Module User Guide
55
To Configure Gateway Port Forwarding Settings
Using Web Manager
To modify gateway port forwarding information, click
Gateway
on the menu and select
Configuration > Port Forwarding
.
Using the CLI
To enter the gateway command level:
enable -> config -> gateway -> port
forwarding rule <
number
>
Using XML
Include in your file:
<configgroup name="gateway"> <configitem name="port
forwarding" instance="<number>">
Static Routes
Allows the user to add routes to the device routing table.
Table 5-25 Static Route Setting Routes
Table 5-26 Adding a New Static Route
To Configure Gateway Static Route Settings
Using Web Manager
To modify gateway static route information, click
Gateway
on the menu and select
Configuration > Static Routes
.
Static Route Settings
Description
Enabled
Enables the static route.
Delete
Deletes the static route.
Name
User friendly name for the route. Click on the [Edit] icon to make changes.
Route
Network or Host for the route.
Applied
If the route was successfully applied. Routing table updates require a
reboot and route needs to be valid as per other device configurable.
Adding New Static Route
Settings
Description
Name
Enter the user friendly name for the route.
Network
Enter the Network or Host for the route.
Gateway
Enter the Gateway for the route.
Interface
Select the Interface for the route.
Metric
Enter the priority for the route. Lower metric means higher priority.
Add
Click
Add
after adding new route information.
