12: Maintenance and Diagnostics Settings
PremierWave® EN Embedded System on Module User Guide
115
To Ping a Remote Host
Using Web Manager
To ping a Remote Host, click
Diagnostics
in the menu and select
Ping
.
Using the CLI
To enter the command level:
enable, ping <host> <count> <timeout>
Using XML
Not applicable.
Traceroute
Here you can trace a packet from the PremierWave EN embedded system on module to an
Internet host, showing how many hops the packet requires to reach the host and how long each
hop takes. If you visit a web site whose pages appear slowly, you can use traceroute to determine
where the longest delays are occurring.
Table 12-9 Traceroute Settings
To Perform a Traceroute
Using Web Manager
To perform a Traceroute, click
Diagnostics
in the menu and select
Traceroute
.
Using the CLI
To enter the command level:
enable, trace route <host>
Using XML
Not applicable.
Timeout
Enter the time, in seconds, for the PremierWave to wait for a response from the
host before timing out. The default is
5
seconds.
Submit (Button)
Click the
Submit
button after entering ping information.
Diagnostics:
Traceroute Settings
Description
Host
Enter the IP address or DNS hostname. This address is used to show the path
between it and the PremierWave device when issuing the traceroute command.
Protocol
Select the traceroute protocol from the drop-down menu.
Submit (button)
Click the
Submit
button after entering traceroute information.
Diagnostics: Ping
Settings (continued)
Description
