Lantronix Micro125 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 74

background image

4: Using DeviceInstaller

Device Details
Settings

Description

Comments

Configurable field. Information about the Micro125.
Double-click the field, type in the value, and press Enter to complete. This
description or comment is not visible on other PCs or laptops using
DeviceInstaller.

Device Family

Non-configurable field. Displays the Micro125’s device family as Micro125.

Type

Non-configurable field. Displays the device type as Micro125.

ID

Non-configurable field. Displays the Micro125’s ID embedded within the
box.

Hardware Address

Non-configurable field. Displays the Micro125’s hardware (or MAC)
address.

Firmware Version

Non-configurable field. Displays the firmware currently installed on the
Micro.

Extended Firmware
Version

Non-configurable field. Displays the full version nomenclature of the
firmware.

Online Status

Non-configurable field. Displays the Micro125’s status as online, offline,
unreachable (the Micro125 is on a different subnet), or busy (the Micro125
is currently performing a task).

IP Address

Non-configurable field. Displays the Micro125’s current IP address. To
change the IP address, click

Assign IP

on the DeviceInstaller menu bar.

IP Address was
Obtained

Displays “Dynamically” if the device automatically received an IP address
(e.g., from DHCP). Displays “Statically” if the IP address was configured
manually. If the IP address was assigned dynamically, the following fields
appear:



Obtain via DHCP

with value of True or False.



Obtain via BOOTP

with value of True or False.



Obtain via RARP

with value of True or False



Obtain via Auto IP

with value of True or False

Subnet Mask

Non-configurable field. Displays the Micro125’s current subnet mask.

Gateway

Non-configurable field. Displays the Micro125’s current gateway.

Number of COB
partitions supported

Non-configurable field. Displays the number of COB partitions supported.

Number of Serial
Ports

Non-configurable field. Displays the number of ports on the Micro125.

TCP Keepalive

Non-configurable field. Displays 1-65s, the Micro125’s TCP keepalive
value. The default setting is 45.

Telnet Supported

Non-configurable field. Indicates whether Telnet is enabled on this
Micro125.

Telnet Port

Non-configurable field. Displays the Micro125’s port for Telnet sessions.

Web Port

Non-configurable field. Displays the Micro125’s port for Web-Manager
configuration.

Maximum Baud Rate
Supported

Non-configurable field. Displays the Micro125’s maximum baud rate.
Note: the Micro125 may not currently be running at this rate.

Micro125 User Guide

16

«
...
14
15
16
17
18
...
»

Содержание Micro125











































































Отзывы:

Нет отзывов

Похожие инструкции для Micro125

3CR860-95 - OfficeConnect Secure Router

Бренд: 3Com Страницы: 2

Бренд: 3Com Страницы: 26

Бренд: Garmin Страницы: 2

Бренд: National Instruments Страницы: 162

Бренд: Qlogic Страницы: 2

Бренд: Qlogic Страницы: 172

SMART NODE 4950-NCE

Бренд: Patton electronics Страницы: 8

NetLink 2960 RAS

Бренд: Patton electronics Страницы: 2

Бренд: Patton electronics Страницы: 2

Бренд: Tripp Lite Страницы: 20

Бренд: QNO Страницы: 106

Бренд: Face Страницы: 8

Бренд: Edgewater Networks Страницы: 7

TD-3316B4-16P-A1

Бренд: TVT Digital Страницы: 2

Бренд: CELOT Страницы: 34

Бренд: axing Страницы: 4

Бренд: Accton Technology Страницы: 78

CloudGen Firewall

Бренд: Barracuda Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды