Lantronix ION C2110, Инструкция по установке

Страница: 5 / 24

Lantronix C2110 Install Guide
33415 Rev. C https://www.lantronix.com Page 5 of 24
Product Description
The ION C2110 is a media converter module that provides an interface between 100Base-TX ports and
100Base-FX ports, allowing users to integrate fiber optic cabling into 100Base-TX copper environments.
Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it
ideal for applications where low latency is essential. The ION C2110 is a manageable device when
installed in a managed ION chassis.
Note: Some Documentation may have Transition Networks named or pictured. Transition Networks was
acquired by Lantronix in August 2021.
Ordering Information
C2110-1011 : 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm MM (ST) [2 km/1.2 mi.] Link
Budget: 11.0 dB
C2110-1013 : 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm MM (SC) [2 km/1.2 mi.] Link
Budget: 11.0 dB
C2110-1039 : 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm MM (LC) [2 km/1.2 mi.] Link
Budget: 11.0 dB
C2110-1014 : 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm SM (SC) [20 km/12.4 mi.]
Link Budget: 16.0 dB
C2110-1019 : 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm SM (LC) [20 km/12.4 mi.]
Link Budget: 17.3 dB
C2110-1040
: 100BASE-TX (RJ-45) [100 m/328 ft.] to 100Base-X SFP Slot (empty)
Features
• Auto-Negotiation of speed and duplex on TP port
•
Auto-MDI/MDIX on TP port
•
Link Pass Through (LPT)
• Far-End-Fault (FEF) detection
• Automatic Link Restoration
•
Pause advertisement
•
Field Upgradeable Firmware
•
Can be used in any ION Platform Chassis
• Standards based, will link with any Standard 100Base-TX and any Standard 100Base-FX ports
Manageable Features
•
Report converter status to chassis management software:
o
TP and Fiber Link Status
o Hardware switch settings
o Copper Port Speed
o
TP and Fiber Port Duplex
o Fault condition
• Write operation includes:
o Power on/off device
o
Auto-Negotiation enable/disable
o
Force 10 Mbps or 100 Mbps
o Force half or full-duplex
o Select advertising modes when Auto-Negotiation is enabled