Lantronix
C2110 Install Guide
33415 Rev. C
Page 6 of 24
o
LPT enable/disable
o
FEF enable/disable
o
Pause enable/disable
o
Auto-MDI/MDIX enable/disable
Note: Manageable Features are available when used in an ION Platform chassis along with an ION
Management Module.
Distances
Part
Port 1 - Copper
Port 2 - Duplex Fiber-Optic
Number
10/100/1000Base-T
100Base-FX
C2110-1011
RJ-45 100 m
(328 ft)
ST, 1300nm multimode,
2 km
(1.2 miles)
*
C2110-1013
RJ-45 100 m
(328 ft)
SC, 1300nm multimode, 2 km
(1.2 miles)
*
C2110-1014
RJ-45 100 m
(328 ft)
SC, 1300nm single mode, 20 km
(12.4 miles)
*
C2110-1019
RJ-45 100 m
(328 ft)
LC, 1300nm single mode, 20km
(12.4 miles)
*
C2110-1039
RJ-45 100 m
(328 ft)
LC, 1300nm multimode, 2km
(1.2miles)
*
C2110-1040
RJ-45 100 m
(328 ft)
SFP slot
(empty)
*
Typical max. cable distance. Actual distance depends on network installation physical characteristics.
Other transmission distances can be achieved with an open SFP converter (C2110-1040) and the
appropriate SFP module to match your required fiber type and transmission distance.
Applications
Fiber Integration in 10/100 Copper Environments
: The ION C2110 device provides an interface
between 100Base-TX ports and 100Base-FX ports allowing users to integrate fiber optic cabling into
100Base-TX copper environments.
