Lantronix ION C2110, Инструкция по установке

Страница: 10 / 24

Lantronix C2110 Install Guide
33415 Rev. C https://www.lantronix.com Page 10 of 24
J6: E/H 3-Pin Jumper (Do Not Alter)
The default setting is “E” (Ethernet). Do not change this setting.
E - Ethernet
: Ethernet mode of operation (Default - Leave as is).
H - HSTR : High Speed Token Ring mode. Do not use this setting.
Note that PCB layout and components can vary by revision.