Lantronix
x6310 ION POTS Media Converter User Guide
33818 Rev. A
Page
6
of
39
x6310 Features
•
Audio transmission of voice grade signals
•
Supports ringing at distant end
•
Supports Caller ID
•
Configurable worldwide country formats
•
Must be deployed in pairs:
o
ION chassis card and stand-alone unit
o
ION chassis card and ION chassis card
o
Stand-alone unit and stand-alone unit
•
Single product configurable to FXO Mode or FXS Mode
•
Automatic Ring Down supported when both converters are configured to FXS Mode
•
SFP based product:
o
Uses Gigabit Ethernet SFP Modules
o
Lantronix offers a wide variety of SFP modules to support multimode or single-mode fiber, as well as
dual or single strand fiber installations
•
SNMP Management supported when installed in a managed ION chassis
•
Supports remote management of paired unit, in-band, over the fiber
•
Electrical interface is provided through an RJ-11 female connector
•
Field upgradeable firmware
•
Only supports analog POTS lines
•
Compatible with traditional telephone modems
x6310 Specifications
Standards
FCC Part 68
ETSI ES 203-021 (TBR21)
ISED CS-03
Analog Port
RJ11 Connector
FXS Mode
Impedance: 600 ohms
REN: 1.0
Ring Cadence: 25 Hz
FXO Mode
Impedance: 600 ohms
Battery Source: 48 VDC +/- 5V
Ringing Supply: 90Vp-p
Ring Frequency: 16-65 Hz
DIP Switches
DIP switches to set the Emulation Mode and Region Codes:
SW1 Up = FXO; Down = FXS
SW2 Up = Normal; Down = FXS Reversed
SW3 Up = U-Law; Down = A-Law
SW4 not used
SW5 – SW8 Country Code Select
