Lantech IGS-5008T Series, Руководство пользователя

Страница: 20 / 27

19
3.1.4 Fitting the device, grounding
Install the system in a dry and clean area to protect the switch to
get exposed with dirt.
Plug the connector to the power supply plug then turn on the power
supply.

Ground
The chassis is grounded via a separate ground nut (M3).
Use toothed locking washers for a good electrical connection.
Ground screw of IPGS-5008T-X switch
3.1.5 Connect the M12 connector with RJ-45 data cable, ports are not
used shall be caped that comes with the package to insulate the
surrounding.