www.lanpro.com
Wireless - Equipment - 2.4 GHz - LP-1521 User Manual High Speed Long Range Wireless Broad Band Router, with PoE
8
Click OK to completes the IP parameters setting.
For OS of Microsoft Windows NT:
Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control Panel
window will appear.
Move mouse and double-click the right button on
Network
icon. The
Network
window will appear. Click
Protocol
tab from the
Network
window.
Check the installed list of
Network Protocol
window. If TCP/IP is not installed, click the
Add
button to install it;
otherwise go to step 6.
Select
Protocol
in the
Network Component
Type
dialog box and click
Add
button.
Select
TCP/IP
in
Microsoft
of
Select Network Protocol
dialog box then click OK button to install the TCP/IP
protocol, it may need the Microsoft Windows CD to complete the installation. Close and go back to
Network
dialog box
after the TCP/IP installation.
Select
TCP/IP
and click the properties button on the
Network
dialog box.
Select
Specify an IP address
and type in values as following example.
• IP Address:
192.168.1.254
, any IP address within 192.168.1.1 to 192.168.1.253 is good to connect the Wireless
LAN Access Point.
• IP Subnet Mask:
255.255.255.0
Click OK to complete the IP parameters setting.
1
2
4
5
3
6
7
8
Connect to the LP-1521 WLAN Broadband Router
Open a WEB browser, i.e. Microsoft Internet Explore, then enter 192.168.1.254 on the URL to connect the WLAN Broadband
Router.
Management and configuration on the WLAN Broadband Router
Status
This page shows the current status and some basic settings of the device, includes system, wireless, Ethernet LAN and WAN
configuration information.
Figure 4
9
Screen snapshot – Status
