www.lanpro.com
Wireless - Equipment - 2.4 GHz - LP-1521 User Manual High Speed Long Range Wireless Broad Band Router, with PoE
17
Wireless - Access Control
If you enable wireless access control, only those
clients whose wireless MAC addresses are in the
access control list will be able to connect to your
Access Point. When this option is enabled, no
wireless clients will be able to connect if the list
contains no entries.
Figure 17
Screen snapshot – Wireless Access Control
Item
Description
Wireless Access Control
Mode
Click the
Disabled, Allow Listed
or
Deny Listed
of drop down menu choose wireless
access control mode.
This is a security control function; only those clients registered in the access control
list can link to this WLAN Broadband Router.
MAC Address
Fill in the MAC address of client to register this WLAN Broadband Router access
capability.
Comment
Fill in the comment tag for the registered client.
Apply Changes
Click the
Apply Changes
button to register the client to new configuration setting.
Reset
Click the
Reset
button to abort change and recover the previous configuration setting.
Current Access Control List
It shows the registered clients that are allowed to link to this WLAN Broadband Router.
Delete Selected
Click to delete the selected clients that will be access right removed from this WLAN
Broadband Router.
Delete All
Click to delete all the registered clients from the access allowed list.
Reset
Click the
Reset
button to abort change and recover the previous configuration setting.
LP-1521 WDS Settings
Wireless Distribution System uses wireless media
to communicate with other APs, like the Ethernet
does. To do this, you must set these APs in the
same channel and set MAC address of other AP
that you want to communicate with in the table
and then enable the WDS.
Screen snapshot – WDS Setup
Figure 18
