Lanpro LP-1521, Руководство пользователя

Страница: 29 / 40

www.lanpro.com
Wireless - Equipment - 2.4 GHz - LP-1521 User Manual High Speed Long Range Wireless Broad Band Router, with PoE
29
Item Description
Enable Tunnel # Click to enable the IPSEC VPN current tunnel.
Connection Name Assign the connection name tag.
Auth Type Click to select PSK or RSA.
Local Site
Local IP Address/
Network
Local Subnet Mask
Click to select Single Address or Subnet Address VPN connection.
Fill in IP address or subnet address depends on which Local Site option you choose.
Fill in the local subnet mask.
Remote Site
Remote Secure Gateway
Remote Gateway
DomainName
Remote IP Address/
Network
Remote Subnet Mask
Click to select Single Address, Subnet Address, Any Address or NAT-T Any
Address VPN remote connection.
Fill in remote gateway IP address
Fil in remote gateway Domian Name
Fill in IP address or subnet address depends on which Remote Site option you choose.
Fill in remote subnet mask
Local/Peer ID
Local ID Type
Local ID
Remote ID Type
Remote ID
Define IKE exchange information type
Click to select IP, DNS or E-mail as local exchange type
Fill in local ID except IP selected
Click to select IP, DNS or E-mail as remote exchange type
Fill in remote ID except IP selected
Screen snapshot – VPN Setup-Edit-2
Figure 35
Item Description
Key Management Click to select IKE or Manual mode.
Advanced Click Advanced button to configure more IKE settings.
Connection Type Click to select Initiator or Responder mode.
Connect Click to connect manually. [Responder mode only]
Disconnect Click to disconnect manually. [Responder mode only] .
ESP
Click to configure 3DES, AES128 or NULL encryption.
Click to configure MD5 or SHA1 authentication.
PreShared Key Fill in the key value. [IKE mode only]
Remote RSA Key Fill in the remote gateway RSA key. [IKE mode only]
Status It shows connection status. [IKE mode only]
SPI Fill in Security Parameter Index value. [Manual mode only]
Encryption Key Fill in encryption key. [Manual mode only]
Authentication Key Fill in authentication key. [Manual mode only]
Apply Change Click the Apply Changes button to save current tunnel settings.
Reset Click the Reset button to abort change and recover the previous configuration setting.
Refresh It shows the current connection status. [Manual mode only ]
Back It returns back to VPN Setup page.