Lanner NCA-5520, Руководство пользователя

Страница: 27 / 123

27
Mounting the CPU onto the Heat Sink
1. Align the PIN1 indicator on the
processor with that on the carrier.
2. Gently insert one side of the
processor into the carrier and make
sure the alignment feature is aligned
with the latch of the carrier.
Note : During assembly, it is essential to have (1)PIN1 on the processor aligned with that on
the carrier, and (2) the alignment features on the top and the bottom of the CPU aligned with
the corresponding carrier latches.
3. For the other end of the carrier, align
the alignment feature of the
processor with the carrier latch, and
then gently bend over the carrier end
to have the latch clamp on the
processor.
Latch
1
2
3
Latch